Firmware Vivo U20 Flash File

On this page we will share stock rom firmware for Vivo U20, the flash file comes in a zip package.

if you own a Vivo U20 smartphone and want to Install Stock Rom / firmware to unbrick or fix bootloop issue then you are on Correct Place.

in this article we share a step by step guide to install stock firmware on Vivo U20.

This Vivo U20 Flash File (Stock ROM) can help you easily un-brick or restore your device to its default or factory state.

If you have previously rooted or modified the system (or other) partition of the phone in any way, flashing this stock rom will overwrite all existing modified system files to replace with factory software.

Download Vivo U20 Flash File (Stock ROM)

Package Name: Comming_soon
Support Tools: QFIL / Qcom Dloader
File Size: - GB
Download Link: Uploaded.....

Charge the phone to at least 50% so that the flashing process will not be interrupted by low battery. Interrupting the firmware installation means bricking your phone.

How to Update Vivo U20 with SD card (In RecoveryMode)

1. Download the Vivo U20 Firmware.
2. Copy Vivo firmware file into the root directory of your SD Card. (A root directory is a top-most directory in the SD Card file systems).
3. Power off the phone and Insert your SD card into your phone.
4. After that restart again your phone into recovery mode.
5. Press and hold the Power and Volume Down buttons together, until your phone enters Recovery Mode.
6. In the Recovery Mode, select "Install from storage device" > "Install from SD".
7. Find the update package from your SD card.
8. Push the Power Button to start update process confirmation message will appear on your screen. Click Yes.
9. Your device will reboot after push the Power Button and start updating.
10. Wait for complete, which will take some time.
11. Done.

How to Flash Vivo U20 Firmware with QFIL (Stock ROM)

1. Download and Extract the Vivo U20 Firmware Package on the Computer.
2. Now, Install the provided Qualcomm USB Driver on the Computer.
3. Once you have successfully installed the USB Driver, Open QFIL Flash Tool on the Computer.
4. Once the QFIL Flash Tool is Launched, Connect your Vivo Smartphone to the Computer by using the USB Cable.
5. Now, Click on the "Download" or "Upgrade" Button in the QFIL Flash Tool to begin the Flashing process.
6. Once the flashing is completed, you will see a Success Message at the End.
7. Now, Disconnect your Vivo U20 Smartphone from the Computer and Restart it.
8. Done.

Notes:

[*] QFIL Flash Tool: If you wish, you can download the latest version of QFIL Flash Tool from QFIL Flash Tool for Windows page.

[*] Backup: We recommend you to take a backup of your personal data from the device, before flashing or writing the Stock Firmware or IMEI because flashing the stock firmware or IMEI may permanently delete your personal data from the device.

[*] Original firmware: The above Vivo firmware is the original firmware, released by the Vivo Mobility Inc. We have scanned the firmware with Eset Internet Security before publishing it online.